6
Step-Saver Owner’s Manual Part No. 000738, 13-m07-2010
2. SPECIFICATIONS
Step-Saver Specifications
Applications Residential, indoor, straight-run stairway
Load capacity 300 lb (136 kg)
Maximum travel 32 ft (9.75 m)
Travel speed 20 ft/min (0.10 m/s)
Angle of incline 25° to 50°
Drive system Rack and pinion
Operator controls
Constant pressure buttons (UP/DOWN rocker switch
on chair and remote control call/send units)
Motor 1/2 HP, 24 VDC
Fold-up width 15 1/2” (394 mm)
Rail
Aluminum extruded
For stairs with a door or hall at the bottom, optional
flip-up rail is available (constant charge system not
available with this option)
Charging
Charges on standard household power (110 VAC)
Constant charge system along the rail ensures the
stairlift is always charged
Emergency operation
Battery-powered operation allows use even through
a power failure
To Next Page
Loading...
