Quick guide
1. switch machine
(1) Power on: push the power switch of the
recording pen from the "off" position to the
"on" position, and it will start automatically
(2) Turn off: push the power switch of the
recording pen from the "on" position to the
"off" position
2. Start recording - stop (save)
(1) Start recording: start recording when
the recording switch is pushed upward
from the "save" position to the "recording"
position (the red light is on when the
recording enters, and the recording time
starts to move on the screen at this time,
indicating that the machine is recording)
(2) Save recording: during recording, when
the recording switch is pushed down from
the "recording" position to the "save"
position, it stops and saves the current
recording file
To Next Page
Loading...