Savvy SavvyLevel User Manual

Savvy SavvyLevel

10 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SavvyLevel™

Android™ User Guide v1.4

Table of Contents

Questions and Answers:

G
Gregory ChandlerAug 3, 2025
What to do if I get a message ‘No data from device’ on my Savvy Motorhomes?
- D
  Dawn GrossAug 3, 2025
  If you see the message ‘No data from device’ and the device flashes red or yellow, verify the power connection to the SavvyLevel Motorhomes device. Also, ensure you are within Bluetooth range. Note that only one smartphone can connect to the device at a time, so check for other connected devices. If the device flashes blue, your passkey may be incorrect. Change your passkey to the correct value. If you don’t know your passkey, then refer to section 9 Reset SavvyLevel to Factory Default.
S
Shannon WallaceAug 13, 2025
How to improve Bluetooth signal range on Savvy Motorhomes?
- J
  Jennifer RobertsAug 13, 2025
  The Bluetooth signal range of your SavvyLevel Motorhomes device might be poor due to obstructions, such as metallic objects, blocking the direct path between your smartphone and the device. To improve the signal, try operating your smartphone in a different location. You can also try opening hatches or window coverings in your caravan where your SavvyLevel is installed or try to place your SavvyLevel in a better location.
D
Dillon SalazarAug 22, 2025
Why my compass does not work on Savvy Motorhomes?
- P
  Patrick MelendezAug 22, 2025
  Check that your SavvyLevel Motorhomes device is not too close to magnetic or ferrous objects.

Savvy SavvyLevel Specifications

General

Category	Motorhomes
Gross Vehicle Weight	3500 kg
Berths	4
Water Tank Capacity	100 l
Transmission	Manual

Summary

What is SavvyLevel?

Key Features

Specification

Installation

Download the application

Connecting and Personalizing

Changing your passkey

A passkey encrypts data between your Smartphone and the SavvyLevel device. Record your passkey and keep it safe.

Changing your device name

Zero Level Calibration

Basic Operation

Day/Night brightness operation

Reset SavvyLevel to Factory Default

Troubleshooting