Do you have a question about the Saxdor 200 SPORT S3 2021 and is the answer not in the manual?
Defines the meaning of DANGER, WARNING, CAUTION, and NOTICE labels.
Details on the manufacturer and the specific boat model and year.
Key specifications and dimensions of the boat presented in a table.
Explanation of the craft's design category based on winds and waves.
Explanation of information found on the craft's builder's plate.
Explanation of Hull Identification Numbers (HIN) and their purpose.
Defines maximum length, including structural and fixed parts.
Defines hull length, used for registration and official purposes.
Defines maximum beam, including structural and deck elements.
Defines beam of hull, excluding removable parts.
Specifies the calculated maximum number of persons allowed onboard.
Advises against exceeding the maximum recommended engine power.
Details the maximum load capacity recommended by the manufacturer.
Specifies the boat's maximum height above the waterline.
Defines maximum draft, including the outboard engine.
States fuel tank capacity and indicates the fuel filling point location.
Illustrates through-hull fittings for bilge pumps, vents, and drains.
Shows the location of cockpit drains under storage locker lids.
Advises keeping hatches and locker lids closed to prevent flooding.
Details manufacturer, model, and capacity of both bilge pumps.
Explains how automatic and manual bilge pumps are activated.
Discusses factors affecting stability like mass distribution and closing openings.
Identifies the location of the fire extinguisher and fire port.
Outlines the owner's responsibility for fire-fighting equipment.
Provides critical warnings for fuel lines, ventilation, and handling.
Lists critical warnings for modifications, storage, and operation.
States system voltage and location of the main battery switch.
Details fuse locations for various systems like steering, navigation, and bilge pumps.
Describes the location and function of electrical dials on the steering console.
Provides critical warnings for working on or modifying the electrical system.
Recommends reducing speed in rough seas and avoiding sudden maneuvers.
Discusses the impact of trim settings and speed on stability.
Warns about the dangers of carbon monoxide from engine exhaust.
Defines the intended working deck area and areas not to be used underway.
Describes the recommended method for reboarding from the water.
Advises awareness of environmental laws and marine pollution regulations.
Details use of cleats and bow eye for anchoring, mooring, and towing.
Emphasizes using a trailer suitable for the craft and its mass.
Lists items included and excluded in the craft's mass when towed on a trailer.
Details warranty periods for hull, gel coat, and general conditions.
Lists conditions and defects not covered by the warranty or that invalidate it.
Outlines the process for notifying Saxdor and handling complaints.
Describes the process for eliminating defects and signing protocols.
Explains how to exercise warranty rights with a valid warranty card and receipt.
Details charges for service staff transport if the boat is not ready for repair.
Details connections and components for the main electrical wiring diagram.
Illustrates connections between various electrical components.
Details wiring for speakers and roof/anchor lights.
Shows connections for suspended speakers and roof/anchor lights.
Details wiring for suspended speakers and anchor lights.
Illustrates connections for suspended speakers and anchor lights.
Details the recreational craft manufacturer and assessment modules.
Provides description of the craft, including hull, propulsion, and category.
Summarizes conformity with general and structural safety requirements.
Summarizes conformity with handling, engine, and fuel system requirements.
Summarizes conformity with electrical, steering, and fire safety requirements.
Details the recreational craft manufacturer and assessment modules.
Provides description of the craft, including hull, propulsion, and category.
Summarizes conformity with steering, fire, and discharge prevention requirements.
Summarizes conformity with emissions and owner's manual requirements.
Provides contact details for Saxdor Yachts Oy, including address and email.
| Max speed | 45 knots |
|---|---|
| Seating capacity | 6 |
| Passenger Capacity | 6 |
| Beam | 2.29 m |
| Fuel capacity | 110 L |
| Length | 5.94 m (19 ft 6 in) |