EasyManua.ls Logo

Saxon AA3282 - Page 2

Saxon AA3282
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Read and understand all warnings and instructions prior to use
Do not overload this jack beyond its rated capacity
This jack is intended to be used on cars, vans and light trucks
This jack is designed for use on hard level surfaces only
The load must be supported by axle stands once raised
Do not move the vehicle whilst it is on the trolley jack
Lift only on areas as specified by the vehicle manufacturer
No alterations to the trolley jack should be made
Failure to heed these warnings may result in damage to the jack
and/or failure resulting in personal injury or property damage
Inspect the jack before each use. It is your responsibility to keep
warning labels legible and intact
Please save manual for future reference.
Saxon disclaims any liability for damage arising from misuse of this product.
OPERATION
The operator is responsible for maintaining the unit in good working order. Safety information
should be emphasised and understood prior to use. This jack should be inspected as per the
instruction manual before each use. It is the owner’s/operators’ responsibility to study all
warnings, operating and maintenance instructions contained on the product label and within this
instruction manual to ensure proper operation of this jack. The owner/ operator should retain
these product instructions for future reference. This jack shall be maintained in accordance with
the product instructions. No alterations shall be made to this jack.
TECHNICAL SPECIFICATIONSSAFETY WARNINGS
Max Capacity
2 Tonne / 2000kg
Retracted Height
Fully Extended
135mm
330mm
INSPECTION
Before each use a visual inspection should be made for abnormal conditions such as cracked
welds, damaged, bent, worn, loose or missing parts.
This trolley jack should be inspected immediately if it is believed to have been subjected to an
abnormal load or shock. Owner/operators should be aware that repair of this trolley jack requires
specialised equipment and knowledge.
3
JACK
POINT
HANDLE
SOCKET
AIR VENT
VALVE
RELEASE
VALVE
CARRY
HANDLE
LEVER
HANDLES
CASTER
WHEEL
2