PLEASE READ BEFORE FIRST USE
This system has been designed for simple DIY installation and
can be installed into any vehicle with a 12V electrical system, by
plugging into the vehicles accessory sockets. This Head Up
Display (HUD) uses GPS signals to calculate the vehicle speed,
therefore it WILL NOT WORK inside buildings, underground car
parks or tunnels where a GPS signal is unavailable. Please
select a suitable location on your dashboard for installation that
offers a CLEAR LINE OF SIGHT to open sky in front and slightly
above the unit's location (i.e. on a dashboard with a sloping
windscreen). When the HUD does not have a satellite signal fix,
the LED signal indicator will flash red. Once it receives the
satellite signal fix it will illuminate to green.
GPS signals fluctuate in strength. As this device operates it
maintains connection to only the strongest signals available
and may momentarily drop a weakening signal in favour of a
stronger one. These changes happen automatically as
controlled by the unit's processor. This may affect the
displayed speed by not being 100% accurate or taking slightly
longer to display current speed. Situations that may affect the
accuracy of this HUD include:
Upon first use this HUD will take up to 1 minute to locate and
lock onto its required satellite signals, or after any extended
period of not using (approximately longer than a week). If used
frequently, the HUD will only take up to 30 seconds to acquire
operational signals.
2
To Next Page
Loading...