Scalemaster Softline 100 - Page 6

6
Controls: Layout & Operaon.
 Large LED Display: A 2 digit LED readout is highly visible for easy reading.
 Easy 3 - Step Programming: Only 3 buons are required to fully control the soener.
 Camsha Indicator: A column of windows located on the le of the LED readout display
provides a visual indicator of the camsha operaon.
 Service Posion Indicator: Is lit to indicate normal operaon.
 Manual Regeneraon Buon: Iniates either a delayed regeneraon or immediate
regeneraon depending upon long or short pressing.
 Flow Indicator: The decimal point/ow indicator blinks on and o when water ow turns
the meter.
 Power Loss Memory Retenon: The controller features baery-free Time of Day retenon
during loss of power. The me will remain in memory for 6 to 24 hours depending on the
installaon. If the memory’s power source becomes exhausted, the Time of Day will reset
to ‘0’ immediately aer power is resumed. The Time of Day must be reset to ensure me of
regeneraon occurs at 02.00am.
NOTE: All other programmed parameters are stored in the ash memory and are retained
during power outages. Flash memory retenon is 100 years.
Valve Layout (Front)
Fig.1
Manual Regeneraon Buon LED Display Time Set Salt Dosage
Camsha
Indicator
Service
Posion
Indicator
Capacity
Set
Delayed Regeneraon Indicator Face Plate Latch Flow Indicator
. .