Scalemaster Softline 100 - Page 8

Salt Dosage: Dosage is already pre-set before leaving the factory. Press to check the
correct seng (see Fig. 5). If you have a 10 litre unit (Soline 100) the seng will be 1.5 (see
Fig. 5) if you have a 15 litre unit (Soline 200) the seng will be 2.2. (If the seng is not
correct, press the buon unl the correct seng is shown.
8
Simple 3 - Step Programming
Time of Day: Press the Time Set buon (see Fig.1)unl desired hour appears. (see Fig.4*).
Note: The elapsed minutes will reset to zero when the hours are changed.
Consult the table on page 9 for cubic capacity sengs, decide on appropriate seng. Press
unl desired seng appears (see Fig. 6).
Programming is now complete
STEP 1
STEP 2
STEP 3
Fig. 5
Fig 6
Fig. 4
Soline 100
Soline 200
* Time
shown is
11.00 am