SCALIX FEJ-5000 - Function Settings; Enter Function Setting Mode; Auto Backlight Selection; Auto Shut Off Selection

SPECIFICATIONS
Model number
Capacity
Division
FEJ -5000
5000g
1.00g
Platter
D=130mm
Net/gross weight
560g
Operating Temperature
0-40℃(32-104℉)
Power source
4×AA Size Batteries or AC/DC (not
supplied)
Adapter 6V/100mA
6
FUNCTION SETTINGS
1. Enter function setting mode.
Press [ON/OFF] to turn the power off. Press [ZERO] first and keep held
while pressing [ON/OFF]. The display will show A_ON or A_OFF.
2. Selection of auto backlight mode.
Press [UNITS] key, the display will show L_ON or L_OFF. Press [ZERO] to
select L_ON (this means auto backlight is activated) or L_OFF (this means
auto backlight function is deactivated).
3. Selection of auto shut off mode.
Press [UNITS] key, the display will show A_ON or A_OFF. Press [ZERO] to
select A_ON (this means the scale will turn off after 2 minutes of no activity)
or A_OFF (this means auto shut off is disabled for continuous use).
4. Return to weighing mode.
Press [ON/OFF] to turn the power off. Press [ON/OFF] again to turn on the
power and the scale return to the weighing mode.
7