Scallywag Kids BOSTON BUNK - User Manual

BOSTON/WOOLDALE BUNK
ASSEMBLY INSTRUCTIONS
This product is designed to conform to the latest safety regulations and we hope you will be happy with
your purchase. This product is primarily produced from quality Scandinavian pine. As such you may find
small knot or surface defects that are inherent with a natural resource and in no way compromise safety
or functionality. Whilst every effort is made to ensure this product reaches you in good condition, in the
unlikely event you find a problem with any component, please do not attempt to assemble – and
contact your retailer. As you will appreciate, we cannot accept any liability for damage once an attempt to
assemble had been made.
Cleaning: a damp cloth should be sufficient to keep this product in good order. Please do not use
abrasive cleaning materials as this will incur damage. Thank you for choosing our product.
Please read & check through these instructions carefully before proceeding with assembly
COMPONENTS
Box 1 of 5 Bunk Ends & Fittings
1 x Lower Bunk End
1 x Upper Bunk End
1 x Instructions
1 x Fittings Pack (Including Knobs for use as single beds):
Bunk Assembly
(A) 28 x M6 115mm Bolt
(B) 28 x M6 Barrel Nut
(C) 4 x M6 38mm Bolt
(D) 4 x 25mm Woodcrews
(I) 36 x 38mm Woodscrews
(F) 1 x 4mm Allen Key
Ladder Assembly
(E) 8 x M6 30mm Bright Bolt
(H) 2 x Ladder Hook
(G) 4 x M4 20mm M/C Screws
(J) 2 x 16mm Woodscrews
Box 2 of 5 Bunk Ends
1 x Lower Bunk End
1 x Upper Bunk End
Box 3 of 5 Rails & Ladder
3 x Plain Side Rails
1 x Ladder Side Rail
2 x Rear Safety Rails
2 x Short Ladder Side Rails
1 x Short Ladder Rail Jointing Piece
2 x Ladder Sides & 4 x Ladder Treads
Box 4 of 5
Mattress Slats
Box 5 of 5
Mattress Slats
Tools Required (Not Supplied)

Scallywag Kids BOSTON BUNK Specifications