ScanCool DKS 63 BE - Page 31

Model number (unique identification of the
product):
DKS 122 BE
Name and address of the manufacturer or his
authorised representative:
Scandomestic A/S
Linåvej 20
8600 Silkeborg
Denmark
This declaration of conformity is issued under
the sole responsibility of the manufacturer (or
installer):
Scandomestic A/S
Linåvej 20
8600 Silkeborg
Denmark
Object of the declaration (identification of
product allowing traceability. It may include a
colour image of sufficient clarity to enable the
identification of the product)
Product:
Display Cooler
Brand:
Scancool
Colour:
Black
The object of the declaration described in point
4 is in conformity with the relevant Union
harmonisation legislation:
EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:1997/A2:2008, EN 61000-
3-2:2014, EN 61000-3-3:2013, EN 55014-2:1197/A2:2008, EN 61000-3-
2:2014, 2014/30/EU, IEC 60335-2 89 :2010 + A1:2012 IEC60335- 1:2010 +
A1:2013 (Fifth Edition), 2019/2018, 2017/1369, 2019/2024, 2009/125/EC,
2021/340, 2021/341, EN 60335-1:2012/A13:2017, EN 60335-2-
89:2010/A2:2017, EN 60335-2-89:2010/A1:2016, EN 60335-1-
2012/A11:2014, EN 62233:2008, 2006/42/EC, ISO 23953-2:2015, ISO 9001,
ISO 14001, RoHS, OHSAS 18001
References to the relevant harmonised standards
used, or references to the specifications in
relation to which conformity is declared:
EN 61000-3-2
Additional information:
The appliance is intended exclusively for storing beverages
EU DECLARATION OF CONFORMITY
Ref. Ares In accordance with EN ISO 17050-1:2004