Need help?Do you have a question about the scandia AVEDUR SCGAS10 and is the answer not in the manual?
General| Brand | scandia |
|---|---|
| Model | AVEDUR SCGAS10 |
| Category | Indoor Fireplace |
| Language | English |
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Contains general warnings about hot surfaces, paint curing, and specific notes for safe operation.
Provides emergency procedures to follow immediately if a gas leak is detected.
Provides detailed measurements for both the heater and the fascia components.
Minimum clearances required for combustible surfaces around the heater.
Specifies the required rough opening dimensions for framing the heater.
Details requirements for Vertical Vent and Rear Vent flue installations.
Illustrates and describes areas around the building where flue terminals must not be located.
Instructions for installing vermiculite and glass media, including lava rock placement.
Step-by-step guide for converting the heater from natural gas to propane gas.
Instructions on how to remove, install, and adjust the heater's fascia.
Steps to install the WiFi module for mobile app control of the heater.
A checklist for installation technicians to verify all installation requirements are met.
Overview of the remote control display and its features, including ON/OFF and time settings.
Explanation of manual and automatic operating modes for temperature and fan speed control.
Detailed guide on programming the thermostat for different periods and temperatures.
Instructions for changing temperature units and restoring factory default settings.
Step-by-step guide for downloading and using the Scandia Avedur mobile app.
Schedule and tasks for annual maintenance of the heater components.
Instructions on accessing internal components via front panel and firebox for servicing.
Troubleshoots issues related to the pilot not igniting when the heater is turned on.
Addresses scenarios where the heater fire extinguishes and fails to relight.
Troubleshoots problems with the unit not operating correctly on low settings.
Troubleshoots issues where the room fan fails to activate.
Addresses causes and remedies for excessive carbon or soot buildup.
Troubleshoots issues related to excessive or insufficient flame height.
Explains heater behavior and manual reignition after a power interruption.
Lists spare parts for the decorative media, including logs and pebbles.
Provides instructions on how to submit a warranty claim for the heater.
Information on how to register the product for warranty purposes online or by mail.
To Next Page