Need help?Do you have a question about the Scandomestic IKF 160-1 and is the answer not in the manual?
General| Hob type | Zone induction hob |
|---|---|
| Frame type | Full trim |
| Product color | Black |
| Hob width size | 59 cm |
| Top surface type | - |
| Appliance placement | Built-in |
| Cooking zone 1 type | Medium |
| Cooking zone 2 type | Large |
| Cooking zone 1 power | 1400 W |
| Cooking zone 1 shape | Round |
| Cooking zone 2 power | 1800 W |
| Cooking zone 1 diameter | 160 mm |
| Cooking zone 1 position | Left front |
| Cooking zone 2 diameter | 180 mm |
| Cooking zone 2 position | Right front |
| Cooking zone 3 position | Left rear |
| Cooking zone 4 position | Right rear |
| Number of cooking zones | 4 zone(s) |
| Cooking zone 1 power source | Electric |
| Number of gas cooking zones | 0 zone(s) |
| Built-in hood | No |
| Package depth | 645 mm |
| Package width | 690 mm |
| Package height | 115 mm |
| Package weight | 10300 g |
| Timer | Yes |
| Timer type | Digital |
| Control type | Touch |
| Control position | Top front |
| Current | 32 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | - W |
| Connected load (electric) | 6400 W |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 590 mm |
| Height | 60 mm |
| Weight | 9000 g |
| Cord length | 1.2 m |
| Installation compartment depth | 490 mm |
| Installation compartment width | 560 mm |
| Installation compartment height | 56 mm |
Step-by-step instructions on how to initiate the cooking process on the induction hob.
Procedure for safely turning off the cooking zones and the entire induction hob.
Information on the automatic safety shut-off function for preventing forgotten cooking.
Pre-installation checks and requirements to ensure proper setup and safety.
Post-installation checks to confirm correct fitting and accessibility.
Detailed instructions for safely connecting the induction hob to the electrical mains supply.
Precautions to prevent electrical shock during installation, operation, and maintenance.
Warnings and advice to avoid injuries from sharp edges or tools during handling.
General critical safety guidelines that must be followed for safe use of the appliance.
To Next Page
