What to do if my Scandomestic TRK 3308 Heat Pump dryer doesn't start?
If your Scandomestic Heat Pump dryer isn't starting, make sure the door is completely closed, the desired program is properly set, and the start button has been pressed.
Why is the drying time too long on my Scandomestic TRK 3308, or the degree of dryness not reached?
If your Scandomestic Heat Pump isn't drying clothes properly or is taking too long, try the following: * Clean the lint filter and heat exchanger. * Empty the water container. * Check the drain hose to ensure it's not blocked. * Make sure the installation place isn't too restricted. * Clean the moisture sensors. * Keep the air inlet clean. * Use a higher drying intensity level program or a time program.
What to do if the display does not turn on for Scandomestic TRK 3308 Heat Pump?
If the display of your Scandomestic Heat Pump doesn't turn on, verify that the power supply is working and the mains plug is properly inserted. Also, check that you've selected a program and pressed the On/Off button.
General| Brand | Scandomestic |
|---|---|
| Model | TRK 3308 |
| Category | Heat Pump |
| Language | English |
To Next Page