Scandyna MiniPod - Connecting your loudspeakers; Running-in period; Care and cleaning; Environmental information

// 7
ENGLISH / Connecting your loudspeakers
We recommend that you read the manual of your amplifier or av-receiver carefully before connecting your
MiniPod loudspeakers. Please switch off all equipment when connecting MiniPod.
The binding posts on the terminal accepts wire
up to Ø 4mm or cables with bananaplugs.
Make sure that the positive terminal binding
posts on MiniPod (+) are connected to the
positive output terminal binding posts on the
amplifier and that the negative terminals on
MiniPod (-) are connected to the negative output
terminal on the amplifier.
You are now ready to enjoy the great sound of
MiniPod.
ENGLISH / Running-in period
We recommend a running-in period of your new MiniPod loudspeakers of approximately 15-20 hours at normal listening level before you decide on the final positioning of the
loudspeakers. During the running-in period, the drive units will settle in and perform as intended.
ENGLISH / Care and cleaning
We strongly advise against the use of any solvents or cleaners on the lacquered MiniPod cabinets. The cabinet surface usually only requires dusting or cleaning with a damp soft
cloth (only use cold clean water). Avoid touching the drive units, especially the tweeter, as damage may result.
ENGLISH / Environmental information
MiniPod complies with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and
Electronic Equipment (WEEE) - the crossed bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.
ENGLISH