Need help?Do you have a question about the Scania R Series and is the answer not in the manual?
Explains the function and types of battery master switches and their external switches.
Details the driver's side airbag system, its warning, and deactivation conditions.
Explains the belt pretensioner system, its location, and deactivation when the vehicle is off.
Details LNG properties, storage pressure, and safety considerations for leaks and expansion.
Covers explosion risks for CNG and LNG vehicles, including trigger points for fuses and pressure valves.
Provides warnings and procedures for gas leakages, including ignition sources, suffocation, and personal injury.
Details fire procedures for gas vehicles, including evacuation, extinguishing agents, and safety valve warnings.
Explains the hybrid system's electric propulsion, voltage classes, and safety precautions for working with voltage class B.
Specifies conditions for recovery, towing with a fitted propeller shaft, and important lifting/towing notes.
Describes the lithium-ion propulsion battery, its connection via the inverter, and its location.
Describes lithium-ion propulsion batteries, their connection, and distribution across the electric vehicle frame.
Provides information on battery cell contents, potential hazards from cell contents, and gas properties.
Details the electric vehicle powertrain, battery count, voltage classes, and safety precautions.
Lists safety features of the electric drive system, including cable harness color and system monitoring.
Provides steps to safely disconnect all power to an electric vehicle, including capacitor discharge time.
Outlines procedures for extinguishing propulsion battery fires and other fires in electric vehicles.
Provides instructions on fitting and using the Scania recovery tool kit for vehicle recovery.
To Next Page
General