EasyManua.ls Logo

Scania P Series User Manual

Scania P Series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1 (103)
374 770
Product information for the
emergency services
Truck
L, P, G, R and S series
00:01-08
Issue: 8 en-GB

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Scania P Series and is the answer not in the manual?

Scania P Series Specifications

General IconGeneral
BrandScania
ModelP Series
CategoryTrucks
LanguageEnglish

Summary

Product information for the emergency services

Electrical system 24 V

Vehicle safety equipment

Airbag

Warns that airbags contain explosive substances and specifies deactivation conditions related to the ignition key.

Belt pretensioner

Highlights that belt pretensioners contain explosive substances and are deactivated when the ignition is off.

Engine air intake

Air suspension

Cab with air suspension

Details releasing air from the cab's air suspension to stabilize it, including hearing impairment warnings.

Chassis air suspension

Explains the operation of the chassis air suspension unit using controls near the driver's seat.

Securing the cab

Gas vehicles

Vehicle gas

Explains Scania gas vehicles use biogas, natural gas, or methane, detailing their properties and flammability.

Liquid vehicle gas, LNG

Details LNG properties, its cryogenic state, expansion upon leakage, and tank capacity.

Risk management for gas vehicles

Explosion

Discusses explosion risks for CNG and LNG, mentioning temperature fuses, pressure triggers, and explosive pressures.

Damaged gas tank

Advises area evacuation and safe pressure reduction for damaged gas tanks, warning about temperature effects.

Leakage

Provides critical warnings on ignition sources, suffocation risks, and personal injury from LNG leakages.

Fire

Details fire extinguishing procedures for gas vehicles, advising against water on LNG and caution with CNG tanks.

Hybrid vehicles and plug-in hybrid electric vehicles, truck

The electric propulsion system in hybrid and plug-in hybrid vehicles

Explains the hybrid system's power source and voltage classes, with safety warnings for high voltage contact.

Chemical information on propulsion batteries

Electric vehicles

The electric propulsion system in electric vehicles

Explains the electric vehicle's power source and voltage classes, with essential safety warnings for high voltage.

Built-in safety devices

Lists safety features of the electric drive system, including cable harnesses, warning plates, and system monitoring.

Cut all power to the vehicle

Details critical safety procedures for disconnecting the 24 V system and propulsion battery in electric vehicles.

Procedure for extinguishing a fire

Outlines steps for extinguishing propulsion battery fires and other vehicle fires in electric vehicles.

Recovery and shunting

Recovery

Emphasizes following instructions for recovery to prevent injury and damage, with warnings about vehicle functions.

Towing and shunting

Advises towing with a drawbar, noting potential disengagement of vehicle functions and gearbox damage risks.

Detach propeller shaft

Half shaft

All-wheel drive vehicles

Recovery tool

Use

Provides step-by-step instructions for fitting and using the Scania recovery tool, including tightening torque.

Related product manuals