10
hereby declares that
SCANTOOL 800 (C) is manufactured in accordance with the provisions of the
COUNCIL DIRECTIVE of 17. May 2006 (2006/42/EC) – The Machinery Directive (order
no. 561 of 25 June 1994 with subsequent amendments)
2006/42/EC: Directive on machinery-safety
2004/108/EC: Directive on Electromagnetic Compatibility
2006/95/EC: Low Voltage Equipment Safety directive
Also on accordance with:
The council directive of 19 February 1973 (73/23/EEC) – The Low Voltage
Directive – with later amendments (order no. 797 of 30 August 1994)
The council directive of 3 May 1989 (89/336/EEC) – The EMC Directive – with
later amendments (order no. 796 of 5 December 1991 with subsequent
amendments)
SCANTOOL A/S
Industrivej 3-9
9460 Brovst
Denmark
www.scantool-group.com
Tlf: 98 23 60 88
Fax.: 98 23 61 44
To Previous Page
Loading...
