Declaration of Conformity
We, the Manufacturer: SCANTOOLGROUP (Scantool, KEF, Arboga, HM
Machinery)
Address: 3-9 Industrivej, 9460 Brovst, Denmark
Website: www.scantool-group.dk
Telephone: +45 98 23 60 88
Fax: +45 98 23 61 44
Declare under our sole responsibility that the following product to which the declaration
applies:
Is in conformance with the following directives:
− DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Machinery
Directive).
− DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 26 February 2014 on the harmonisation of the laws of the Member States relating to
the making available on the market of electrical equipment designed for use within
certain voltage limits (recast) (Low Voltage Directive) with/and Denmark’s Ministry of
Housing Order No. 797 of 30 August 1994.
− DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 26 February 2014 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility (recast) (Electromagnetic Compatibility (EMC) Directive).
Brovst 1 June 2016
Signed at Date Claus Nielsen
To Next Page
Loading...
