Data Logger
Step1: Configuration
‣
Download TWL-1S app (TWLIT) from www.scarlet.com.tw.
‣
Install the app on PC or laptop following the instructions.
‣
Turn on the device and connect it to the PC or laptop by the USB cable.
‣
Launch'the'app'and'set logging interval (minimum 10 min).'
‣
Disconnect the meter from the computer, and TWL-1s is ready for data logging.
Step2: Data logging
‣
Long press MODE key to turn on data logging mode and the meter displays SUrE.
‣
Press MODE key, if you agree to enter the data logging mode.
‣
Press TIMER key, if you do NOT agree to enter the data logging mode.
‣
When the screen shows rEC, the device is collecting and recording data; Idle means no data are
recorded.
‣
Long press TIMER key to quit data logging mode.
Step3: Download data
‣
Connect to the computer to download the data via the app you installed in the step 1.!
To Next Page
Loading...