To Next PageTo Next Page
Need help?Do you have a question about the SCC TS Series and is the answer not in the manual?
General| Data Rate | 10/100/1000Mbps |
|---|---|
| Storage Temperature | -40°C to 85°C |
| Fiber Type | Single Mode or Multimode |
| Connectors | SC, ST, LC |
| Power Input | 5V DC or 12V DC |
| Wavelength | 1310nm, 1550nm, 850nm |
| Power Supply | External |
| Humidity | 5% to 90% non-condensing |
Symbol indicating rigorous tests by an independent laboratory for BACnet features.
Recognized authority for LONWORKS platform certification and interoperability.
Association supporting network technologies based on Common Industrial Protocol (CIP).
List of compatible SCC controls for the protocol converter.
List of communication protocols supported by the TS Series Protocol Converter.
Details the HOST, FIELD, and ETHERNET ports for the TS-PX4 model.
Details the HOST, FIELD, and ETHERNET ports for the TS-PL4 model.
Details the HOST, FIELD, and ETHERNET ports for the TS-PX2 model.
Details the HOST, FIELD, and ETHERNET ports for the TS-PL2 model.
Details the R1, R2, and ETH ports for the TS-PW model.
Describes the six LEDs indicating status for TS-PL and TS-PX models.
Describes the three LEDs indicating status for the TS-PW model.
Guide to connect a web-enabled device to the protocol converter.
Steps to change the IP address of the protocol converter using Windows.
Instructions for accessing the web-based configuration utility interface.
Procedure to change the protocol using the protocol_select parameter.
Steps to add a device to the configuration via the web interface.
Procedure to add a Lead/Lag Master using serial ports.
Procedure to add a Lead/Lag Master using Ethernet ports.
How to manually add boiler objects to the TS Series Lead/Lag Master.
Connecting Deaerator/Surge Tank Panels via the Lead/Lag Master.
Procedure for direct connection to a TS Series Deaerator/Surge Tank Panel.
Procedure for direct connection to a TS Series Touchscreen Kit.
Configuration parameters for BACnet/IP protocol.
Configuration parameters for BACnet MS/TP protocol.
Configuration parameters for Metasys N2 protocol.
Configuration parameters for Ethernet/IP protocol.
Configuration for Modbus/RTU to Modbus TCP/IP conversion.
Configuration for Modbus TCP/IP to Modbus/RTU conversion.
Configuration parameters for LONWORKS protocol.
Procedure to clear all configured profiles from the protocol converter.
Guide to view or edit network settings for the protocol converter.
Accessing diagnostic and debugging sections of the utility.
Section containing device data and technical support contact information.
Instructions for uploading and downloading system files.
Allows connection via WiFi to an existing wireless network for TS-PW model.
Establishes a wireless access point via WiFi for the TS-PW model.
Viewing connections, data arrays, nodes, and map descriptors.
Information on BACnet/IP protocol using Ethernet and UDP transport.
Configuration for BBMD to send broadcast messages to other BBMD devices.
Information on BACnet MS/TP protocol using RS-485.
List of Rockwell Automation software platforms tested with Ethernet/IP.
Downloading setup files for expediting protocol converter connection.
Importing user-defined data types for connecting devices.
Importing add-on instructions for sequencing message instructions in logic.
Configuring controller tags and selecting user-defined data types.
Placing message instructions and setting up synchronized tags in logic routines.
Configuring messaging instructions with specific tags and array lengths.
Verifying communication by checking DN bits and troubleshooting common issues.
Location and use of the service pin for broadcasting network information.
Procedure for uploading an XIF file during commissioning.
Mapping details for LMV5… device under BACnet/Metasys N2 protocol.
Mapping details for LMV3… device under BACnet/Metasys N2 protocol.
Mapping details for LME7… device under BACnet/Metasys N2 protocol.
Mapping details for RWF10 device under BACnet/Metasys N2 protocol.
Mapping details for RWF55 device under BACnet/Metasys N2 protocol.
Mapping for TS Series Deaerator/Surge Tank under BACnet/Metasys N2.
Mapping for TS Series Touchscreen Kit under BACnet/Metasys N2.
Mapping for Lead/Lag Master (Global System Data) under BACnet/Metasys N2.
Mapping for Lead/Lag Master (Boiler Data) under BACnet/Metasys N2.
Mapping details for LMV5… device under Ethernet/IP protocol.
Mapping details for LMV3… device under Ethernet/IP protocol.
Mapping details for LME7… device under Ethernet/IP protocol.
Mapping details for RWF10 device under Ethernet/IP protocol.
Mapping details for RWF55 device under Ethernet/IP protocol.
Mapping for TS Series Deaerator/Surge Tank under Ethernet/IP.
Mapping for TS Series Touchscreen Kit under Ethernet/IP.
Mapping for Lead/Lag Master (Global System Data) under Ethernet/IP.
Mapping for Lead/Lag Master (Boiler Data) under Ethernet/IP.
Mapping details for LMV5… device under LONWORKS protocol.
Mapping details for LMV3… device under LONWORKS protocol.
Mapping details for LME7… device under LONWORKS protocol.
Mapping details for RWF10 device under LONWORKS protocol.
Mapping details for RWF55 device under LONWORKS protocol.
Mapping for TS Series Deaerator/Surge Tank under LONWORKS.
Mapping for TS Series Touchscreen Kit under LONWORKS.
Mapping for Lead/Lag Master (Global System Data) under LONWORKS.
Mapping for Lead/Lag Master (Boiler Data) under LONWORKS.
Mapping details for LMV5… device under Modbus protocol.
Mapping details for LMV3… device under Modbus protocol.
Mapping details for LME7… device under Modbus protocol.
Mapping details for RWF10 device under Modbus protocol.
Mapping details for RWF55 device under Modbus protocol.
Reference document for TS Series Touchscreen Kit.
Reference document for TS Series Lead/Lag Master.
Reference document for TS Series Deaerator/Surge Tank.
Strategies for remote setpoint control of TS Series Lead/Lag Master.
Interpreting percentage values and stage indicators.
Code mapping for LMV5 sensor selection.
Code mapping for LMV program stop states.
Code mapping for LMV5 operating modes.
Code mapping for LMV5 adaption states.
Lookup for lockout codes and their string representations.
Mapping of LMV3 fuel train configurations.
Default IP and subnet mask for TS Series Deaerator/Surge Tank.
Default IP and subnet mask for TS Series Touchscreen Kit.
List of default IP addresses for different boiler designations.
Default IP and network settings for TS Series Lead/Lag Master.
Log of changes for Revision 18D1, including new points and features.
Log of changes for Revision 18J1, including new models and utility updates.
Log of changes for Revision 19C1, focusing on common profiles and manual configuration.
