E-312NP / User manual
8
The manufacturer :
Declares hereby that the following product :
Manual pneumatic hydraulic rivet nuts setting tool type E-312NPP
Complies with the following relevant conditions :
EC Machinery Directive 2006/42/EC Annex I
If the machine is modified without our knowledge and consent, this EC Declaration of
conformity will be voided
Most important applied harmonized standards :
EN ISO12100:2010 + EN ISO11148-1:2011
Name of documentation officer : Nadia FAYTRE
Address of documentation officer : see address of manufacturer
Lesquin, 30/07/2019
___________________________________________________________________
Franck DEBRUYNE
(Directeur général)
SCELL-IT
28 RUE PAUL DUBRULE
59810 LESQUIN
FRANCE
Tél.: +33(0) 320 329 818
WARRANTY CONDITIONS
EC CERTIFICATE OF CONFORMITY – EC DIRECTIVE
2006/42/EC ANNEX II 1A
During the warranty period, the customer must not perform any alterations other than those permitted by the
manufacturer (maintenance). The repairs must be done by an authorized service center.
To admit warranty repair, the customer must return the defective tool to the service center of the manufacturer
with the proof of purchase. Warranty is valid only if the tool is in its warranty period (12 months from the date of
purchase confirmed by the proof of purchase) and if the conditions of use have been respected.
Warranty is not valid if worn spare parts have to be replaced (further to a normal use of the tool).
To Next Page
Loading...