Sceptre E Series User Manual

- 13 -
www.SCEPTRE.com
SCEPTRE E Series LED HDTV User Manual
8. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as Blu-ray
or HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
9. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
Please Note:
• This TV features a power saving function which will turn off the TV
automatically after 10 minutes of idling on a connection with no signal.
This feature is present on all connection.
Installing Batteries to the Remote Control
Please insert two AAA batteries into the remote control. Make sure that you match the
(+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery
compartment. Afterwards, re-attach the battery cover.
Please note:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage that may
pose a fire risk or lead to personal injury.
• Inserting the batteries incorrectly may also result in cracking or leakage that may
pose a fire risk or lead to personal injury.
• Dispose the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.

Sceptre E Series Specifications

General

Brand	Sceptre
Model	E Series
Category	LED TV
Language	English