Why doesn’t the Sceptre X325BV-FMDR remote fully control the cell phone screen under MHL?
For total control you will need to use the cell phone’s touch screen. The TV’s remote have limited functions and its controls are dependent on the program you are using.
Why does my Sceptre X325BV-FMDR have picture but no audio?
If your Sceptre TV shows a picture but has no sound, first ensure that the audio cable is properly connected. Try readjusting the volume using the remote control. Also, make sure that the TV’s tuner signal is not lower than 65 %.
How to fix a Sceptre X325BV-FMDR remote control that is not working?
If your Sceptre TV remote control isn't working, try these steps: Turn off the TV and unplug it. Remove the batteries from the remote for 30 seconds, then press the remote buttons and the power button randomly for about 2 seconds before reinstalling the batteries. Check if the remote works now. Also, ensure there's a clear line of sight between the remote control's front sensor and the TV's remote sensor, which is located in the same area as the power indicator light.
Why does my Sceptre X325BV-FMDR not receive enough channels through the ATSC/NTSC tuner?
If your Sceptre TV isn’t receiving enough channels, and the TV’s tuner signal must not be lower than 65 %, try changing the direction of your antenna and then rescan for channels.
What to do if my Sceptre X325BV-FMDR has audio but no picture?
If your Sceptre TV has sound but no picture, ensure that both your video and audio cables are connected properly. Also, confirm that the TV’s tuner signal is at least 65 %.
How to get sound on PC connected to Sceptre TV?
To get sound on your Sceptre TV when connected to a PC, ensure you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
Why doesn't my cell phone work when I connect the MHL cable to HDMI on my Sceptre TV?
Check if you connected to HDMI3 or another HDMI since ONLY HDMI3 works with MHL. If it still doesn’t work make sure you have the correct MHL cable (some have more pins than others).
Where can I find the universal remote code for Sceptre TV?
This TV follows SONY’s universal remote code. Please check your hand book for SONY’s codes then apply them.
Why is the picture distorted or has abnormal sound on my Sceptre X325BV-FMDR?
Picture distortion or abnormal sound on your Sceptre TV might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to the wall, try moving it to another room to see if the problem persists.
How to unblock Sceptre TV channels that are blocked?
If TV channels are blocked on your Sceptre TV, check your auto lock function’s settings inside the OSD. You may have locked some channels accidentally.
To Next Page
General
