FSR Series
Page | 2
ATTACHING & REMOVING THE BASE
1. Place the display unit flat on a table. Afterwards attach the plastic feet onto the bottom of the TV. Install
the foot labeled L to the left side of the TV (when you are facing the front of the TV). Install the foot
labeled R to the right side of the TV (when you are facing the front of the TV). Afterwards insert and
tighten the 2 screw to the bottom of each foot.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to use a Display safety
strap (not included) in order to minimize the possibility of the Display toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.
To Next Page
Loading...
Need help?
General
