*Operate your appliance on a at surface.
* Make sure that the attachments are securely put in
their places before operating your appliance and do not
operate when it is empty as without attachments and
food.
*Be certain that mince bowl is securely locked in place
before operating your appliance. It may not operate
unless the bowl is proprely locked in its place.
* Do not touch the moving parts when the appliance is
working.
* NEVER use your nger, fork, spoon or knife to push
the food into the canal. Use ONLY the pusher for this
purpose.
* Wait until moving parts have stopped running before
you remove the parts of the appliance.
* Do not attempt to grind bones, nuts or other hard
items.
* Use your appliance as it is recommended.
NOTE: Fore your personal safety reasons, your meat
grinder may not operate unless the mince bowl is
properly locked in its place.
CAUTIONS: The appliance has been designed for
short-term operation only. Switch it off afterwards
and allow the motor to cool down before switching
on again.
pexpert.indd 25 11.07.2019 18:00
To Next Page
Loading...