Operation Manual VISATRON® VN115/87plus EX 06/2016
Page 4
SCHALLER AUTOMATION D-66440 Blieskastel / Saarland / Germany / Industriering 14 / P.O Box 1280
Industrielle Automationstechnik GmbH & Co. KG Tel. +49(0)6842-508-0 / Fax -260 / eMail: info@schaller.de / www.schaller.de
Safety instructions
The VN115/87plus EX devices are manufactured according to the high quality
standards of SCHALLER AUTOMATION and must pass stringent factory tests. In
order to keep the device in a smooth and problem free operation, the user has to
take note of the safety hints and warnings. In the instruction manual they are
marked with the following symbols.
CAUTION! Do not ignore the text in this box. Personnel
safety can be endangered or the device can be damaged.
WARNING! The marked text contains important information.
The marked text contains only a hint for faster processing.
EX-Symbol contains important interactions about Explosion
proof. CAUTION! Personnel safety can be endangered!
CAUTION! Unplug the OMD during welding processes
on the engine.
CAUTION!
Use a monitoring device at a safe location (e.g. ECR)
to check for the actual oil mist concentration that is
requested by the IACS. In case of an Oil Mist Alarm,
Schaller Automation strongly recommends to
approach the engine only after indicated oil mist
concentration (LED chain) has lowered to half of its
bar indication (VISATRON®-device and Remote
Indicator II).
Follow the instructions of engine builder, ship yard
and ship owner!
In case of a High Oil Mist Alarm the Detector can be
reset if the Oil Mist Concentration has lowered below
the Alarm level.
To Next Page
Loading...
Need help?
General
