15
2017-12-21 / V1.3
Connectors Series M – Installation and Maintenance Instructions
Cable Assembly and Processing
2
3
1
Fig. 8: Example for plug with threaded rear skirt and 90°
shrink boot (applies also for receptacles with thread)
1 Shrink boot 90°
2 Protection cap for plugs or receptacles respectively
3 Plug or receptacle shell respectively
Protection caps for cable receptacles and cable plugs
The following table shows, how protection caps with cords or plastic clips have to be threaded properly on the dif-
ferent cable receptacles and cable plugs.
Protection caps for cable receptacles Protection caps for cable plugs
M1 series
M14 with cord M14 with plastic clip M16 with cord M16 with plastic clip
M11 with cord M11 with plastic clip M16 W with back shell
with cord
M16 W with back shell
with plastic clip
M3 series
M31 mit Schnur M31 with plastic clip M36 with cord M36 with plastic clip
M34 with cord M34 with plastic clip M36 W with back shell
with cord
M36 W with back shell
with plastic clip
To Next Page
Loading...