page 2
Contents
1. General Information 4
1.1. Notes regarding the operating instructions 4
1.2. Notes regarding warranty 4
1.3. Notes regarding security 4
1.4. Dimensions of the machine and technical data 5
1.5. Description of the machine 5
1.5.1. General plan of the machine 6
1.6. Usage 6
2. Installation and initial operation 7
2.1. Checking the contents of the carton 7
2.2. Installation 7
2.3. Electrical installation 8
2.4. Checking the direction of blade rotation 8
3. Operation 8
3.1. Important notes before switching on the machine 8
3.2. Switch functions (push button) 8
3.3. Thickness of slices 9
3.4. Operation of the end piece holder 9
3.5. Automatic or manual movement of the carriage 9
3.6. Automatic operation 9
3.6.1. Engaging carriage 9
3.6.2. Loading the carriage and adjusting the thickness of slices 10
3.6.3. Adjusting the speed of the carriage 10
3.6.4. Notes regarding the slicing programme 10
3.7. Manual operation 10
3.7.1. Disengaging carriage 10
3.7.2. Loading the carriage and adjusting the thickness of slices 10
3.7.3. Notes regarding the slicing programme 10
4. Slicing functions 11
4.1. Description of the keyboard 11
4.2. Starting the slicing programme 11
4.3. Changing the slicing programme 12
4.3.1. Stacking 12
4.3.2. Shingling lengthwise 13
4.3.3. Shingling crosswise 13
4.3.4. Circle shingling 14
5. Programmed Operation (PLU) 15
To Next Page
Loading...
