What does "C" mean on Schartec Easy 800 N display?
If the display shows "C" after system learning and the Schartec Garage Door Opener doesn't work, check the door mechanics because the motor might be overloaded due to a heavy door.
What does "O" mean on Schartec Easy 800 N display?
If the display shows "O" after system learning and the Schartec Garage Door Opener doesn't work, check the door size, because the motor timeout may be occurring due to a tall door.
General| Pulling force | 800 N |
|---|---|
| Power | 600 W |
| Radio frequency | 433.92 MHz |
| Motor Type | DC motor |
| Operating voltage | 230 V |
| Speed | 16 cm/s |
| Safety Features | Obstacle detection |
| Remote Control | Yes |
| Battery Backup | No |
Defines intended use and emphasizes installer qualifications for safe operation.
Warns about spring tension, electrical hazards, and the need for professional repair.
Covers risks from fastening materials, hand ropes, unintentional door movement, and unexpected travel.
Addresses safe mounting and risks like pinching in the boom rail.
Details risks of pinching fingers in the boom rail and injury from pull cord misuse.
Covers risks during door movement, remote control use, and safety installations like photocells.
Details requirements for inspection, maintenance, and testing of safety devices.
Details warranty duration, covered items, and common exclusions like improper installation.
Lists and briefly describes features like automatic safety reverse, soft start/stop, and auto-close.
Emphasizes checking the garage door and system for mechanical health and proper balancing.
Specifies required clearances and the importance of an emergency release for safety.
Lists and illustrates the various parts included in the product's delivery package.
Details the process of assembling the three-part boom rail, including cutting zip-ties and sliding pieces.
Describes running the spring and nut on the threaded rod and securing the trolley connector.
Provides instructions for positioning and mounting the wall and door brackets.
Details attaching the adapter piece, operator to rail, and Easy-Click bracket.
Describes positioning the assembly, attaching brackets, and connecting the shuttle to the door leaf.
Guides on preparing the operator, plugging it in, and reaching standby mode.
Details the procedure for teaching the operator the desired open and closed positions.
Explains how to adjust the operator's force settings (F1-F9) for optimal performance.
Covers enabling photocells and configuring the auto-close timer for convenience.
Explains adjusting motor force and programming remote controls for operation.
Details the procedure for erasing all stored remote control codes from the operator.
Illustrates connections for photocells, signal lights, and push-buttons.
Explains how to use the manual release cord to move the door by hand.
Lists key technical specifications like door size, weight, voltage, and opening speed.
Provides solutions for issues like no operator reaction, system learning failure, or timer problems.
Addresses problems with door opening/closing, automatic movement, and remote control functionality.
Explains error codes like "00", "H", "C", "O", "L" and their respective solutions.
Declares compliance with EC directives and lists relevant standards for the door operator.
To Next Page
