To Next PageTo Next Page
Need help?Do you have a question about the Schaudt Booster WA 121545 and is the answer not in the manual?
General| Input Voltage | 12V |
|---|---|
| Charging Current | 45A |
| Output Current | 45A |
| Battery Type | Lead-acid |
| Protection Features | Overvoltage, short circuit |
Explains the meaning and importance of hazard symbols used in the manual.
Provides fundamental safety guidelines for operating the device.
Outlines the manufacturer's liability regarding the product's use and instructions.
Details the electrical specifications, including charging curves and current limits.
Lists the physical and mechanical specifications of the booster.
Describes the basic connection set for standard vehicle systems.
Details the connection set including fuses and fuse holders.
Explains the connection set for sensors and voltage control.
Covers the complete set for comprehensive installations.
Details connecting the booster to standard EBLs with ground on booster.
Explains connecting the booster to EBLs with SDTBUS and panel.
Describes direct connection of the booster to vehicle batteries.
Covers connection to batteries with additional charging sources.
Guides on connecting optional temperature and battery sensors.
Final steps for completing the installation work.
Overview of the booster's control and display interface.
Explains the indicators and information shown on the display.
Guides on how to view the current configuration settings.
Instructions for selecting the correct battery type for charging.
How to select the power reduction characteristic based on the generator.
Procedure for setting the maximum charge current output.
Explains the function and setting of the bypass switch.
Contact details and procedures for customer support.
Guidelines for reporting a faulty device to the manufacturer.
Visual representation of the booster's components and connections.
Statement confirming compliance with relevant regulations.
