To Next PageTo Next Page
Need help?Do you have a question about the Schaudt LAS 1218 BUS and is the answer not in the manual?
General| Output Current | 18 A |
|---|---|
| Input Voltage | 230 V AC |
| Output Voltage | 12 V DC |
| Charging Technology | IUoU |
| EBL Connection | Yes |
| Weight | 1.4 kg |
| Suitable for | Lead-acid, Gel, AGM batteries |
| Protection Features | short circuit |
Covers safety symbols, general warnings, and mains voltage precautions for safe operation.
Details the intended use of the charger and provides an overview of its physical components and connections.
Explains how to operate the charger, including controls, indicator LEDs, and battery type selection.
Lists common faults, their possible causes, and recommended remedies.
Provides instructions for routine cleaning and maintenance of the battery charger.
General information and safety notes for trained personnel performing installation.
Guidelines for the physical mounting, environment, and clearance requirements for the charger.
Details the sequence and methods for connecting the charger's electrical components.
Describes various connection types: auxiliary, bus systems, direct to batteries, and mains.
Steps for initial setup, including checks, setting battery type, and starting the system.
Provides detailed technical data including dimensions, weight, electrical characteristics, and charging curves.
Instructions for safe storage, packaging, and transportation of the battery charger.
Confirmation of product compliance with relevant EU regulations.
Lists optional accessories like connector cables and temperature sensors.
Contact details, email, and website for customer support.
Instructions for filling out and submitting a fault report for a defective device.
