Schaudt LT453 User Manual

E Schaudt GmbH, E lektrotechnik und Apparatebau, Planckstraße 8, 88677 Markdorf, Germany, Tel. +4 9 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
9310330 BA / EN Date: 29.05.2020
Operating Instructions
Operator and control panel LT 45X
Table of contents
1 Introduction 2............................................
2 Application and function 5.................................
3 Operation 6..............................................
3.1 Layout 6................................................
3.2 Starting up 7.............................................
3.3 Switching on 7...........................................
3.4 Activating consumers 7....................................
3.5 Checking battery voltage 8.................................
3.6 Checking tank levels 9....................................
3.7 T roubleshooting and remedies 10............................
3.8 Switching off 11...........................................
3.9 Closing down the syst em 11................................
4 Maintenance 11...........................................
Appendix 12..............................................

Schaudt LT453 Specifications

General

Brand	Schaudt
Model	LT453
Category	Control Panel
Language	English

Summary

Introduction

Configuration Overview

Provides an overview of configuration features for LT 45X control panels across different models.

Application and Function

Purpose of LT 45X Control Panel

The LT 45X control panel is the central device for the EBL power supply, powering all 12V consumers in the vehicle.

System Devices and Connection Options

Details required system devices like EBL power supply and connection options for water/waste water probes.

Operation

Control Panel Layout

Detailed layout of the LT 45X control panel, identifying touch sensors and displays with their functions.

Starting Up

Procedure for starting up the LT 45X control panel and connecting to the 230V mains supply.

Switching On Consumers

Procedure for switching the 12V supply on and activating consumers like water pump and lighting.

Leisure Area Battery Voltage Check

How to check the leisure area battery voltage and interpret the LED display and voltage table.

Starter Battery and Tank Level Checks

How to check starter battery voltage and water/waste water tank levels using the control panel.

Switching Off

Procedure for switching off the main 12V ON/OFF switch and its effect on the leisure area supply.

Closing Down the System

Steps for properly closing down the system for extended periods, like winter storage.

Troubleshooting and Remedies

Alarms and Voltage Warnings

Interpreting alarms, voltage levels, their possible causes, and recommended remedies for battery status.

Faults and Fuse Issues

Addressing faults like non-functional 12V supply and indicator LEDs, including fuse issues.

Battery Discharge Faults

Troubleshooting faults related to a flat leisure area battery and the mains indicator LED not lighting up.

Maintenance

Cleaning the Control Panel

Guidelines for cleaning the LT 45X control panel using a soft cloth and mild detergent.

Appendix

Block Diagram and Wiring

Technical diagram showing the circuit board layout and wiring connections for the control panel.

Customer Service and Support

Contact information for Schaudt GmbH customer service and procedures for returning faulty devices.

Fault Report Form

A form to be filled out in case of damage, detailing the device and the specific defect.