Schecter Damien Riot - User Manual

Damien Riot
Wiring Diagram
For technical or warranty questions please email: tech@schecterguitars.com
Diagram copyright Schecter Guitar Research 2011
= ground.
Neck
Bridge
3-way switch settings
1 2 3
Master Vol
This symbol
is found where any ground connection
should be soldered.
Black & white wires from pickup
soldered together and insulated.
Green
Bridge Pickup:
EMG-HZ H4
Neck Pickup:
EMG-HZ H4A
Bare
Black & White
Black & white wires from pickup
soldered together and insulated.
Red
.022
Output Jack
Tip (hot output)
Sleeve (ground)
Volume
500k
Tone
500k
Black & White
Bridge
ground wire
EMGHZ
Green
Bare
3-way
lever switch
3
2
1
Red
Master Tone
2
1
3
3-Way
Switch
EMGHZ

Summary

Schecter Damien Riot Wiring Diagram

Neck Pickup Wiring

Details the connection and type (EMG-HZ H4A) of the neck pickup in the wiring diagram.

Bridge Pickup Wiring

Details the connection and type (EMG-HZ H4) of the bridge pickup in the wiring diagram.

Control Circuitry

Explains the wiring for the 3-way lever switch, Volume 500k, and Tone 500k potentiometers.

Output Jack Connection

Shows the wiring connection for the guitar's output jack, including sleeve and tip.

Schecter Damien Riot Component Specifications

Bridge Pickup Details

Provides technical specifications for the EMG-HZ H4 bridge pickup, including construction and output.

Neck Pickup Details

Provides technical specifications for the EMG-HZ H4A neck pickup, including construction and output.

String Specifications

Details the standard 6-string guitar tuning, gauge, and type of strings included.

Graph Tech Black TUSQ XL Nut

Nut Features and Benefits

Describes the Graph Tech Black TUSQ XL nut's impact on tone, sustain, and harmonic content.

Schecter Damien Riot Specifications

General

Body Material	Mahogany
Fingerboard Material	Rosewood
Number of Frets	24
Hardware Color	Black
Number of Strings	6
Scale Length	25.5" (648 mm)
Bridge	Tune-O-Matic with String-Thru Body
Controls	Volume/Tone/3-Way Switch
Finish	Gloss
Tuners	Schecter