SCHEIBER
ISO 9001
SCHEIBER DIFFUSION
85120 SAINT PIERRE DU CHEMIN - FRANCE
Tél : 02 51 51 74 48 Fax : 02 51 51 99 50
Tél international : +33 2 51 51 74
48 Fax international : +33 2 51 51 99 50
E-mail: sav@scheiber.fr Site web: www.scheiber.fr
- 6 -
Date de mise à jour :12/08
The clamp + has to be connected first to the battery.
Functioning of the indicator : indicator on = charger on.
IV MAINTENANCE
BE CAREFUL :
- If replacing a fuse, comply with the calibres given in the technical data. Any other value may
damage the charger ;
- Do not use the charger to charge some cells ;
- During the charge lead-batteries have to be in a well-ventilated location ;
- Only connect the charger in a main socket with earth ;
- You MUST connect the input clamp « earth » in a such way to ensure a continuity of people
protection by the differential of the plug on which the vehicle is connected (in case of bad
insulation of one of the equipment connected to the BIP 230VAC uses) ; for this purpose use the
terminal delivered with the accessories) ;
- If cables are modified and cable-grips cut, once new wiring is finished you must change the
cable-grips ;
- Regularly check that connections are in good state (well screwed) otherwise it can entail an
overheating of the terminals
To Next Page
Loading...
Need help?
General
