Need help?Do you have a question about the SCHEIDT & BACHMANN entervo.lane and is the answer not in the manual?
General| Category | IP Access Controllers |
|---|---|
| Manufacturer | SCHEIDT & BACHMANN |
| Product Name | entervo.lane |
| Relative Humidity | 10% to 95% (non-condensing) |
| Inputs | 4 digital inputs |
| Outputs | 4 relay outputs |
| Communication Interfaces | Ethernet |
| Reader Interfaces | 2 x Wiegand, OSDP |
| Supported Card Technologies | Legic |
| Certifications | CE, FCC |
Explains risk indicators and associated symbols used throughout the manual for hazard communication.
Outlines essential safety precautions for device handling, installation, and maintenance procedures.
Defines the primary purpose and scope of the device's application in parking systems.
Details the process and requirements for physically installing the device pole on the ground.
Explains the electrical and network connections required for the device's functionality.
Guides through the initial setup and configuration steps for the device after installation.
Covers cleaning procedures for housing, display, scanner, and stainless steel stand.
Specific cleaning advice for the acrylic glass barcode positioner to prevent scratches.
Provides the physical measurements and diagram of the device for installation planning.
To Next Page