Need help?Do you have a question about the Schellenberg 20015 and is the answer not in the manual?
General| Brand | Schellenberg |
|---|---|
| Model | 20015 |
| Category | Remote Control |
| Language | English |
Procedure to put the tubular motor into programming mode.
Process of assigning unique addresses to tubular motors for control.
Steps to activate the programming mode on the remote control.
Initiating the pairing process between the remote and the motor.
Confirming successful pairing of the remote control with the motor.
Procedure to set the highest limit position for the shutter/awning.
Confirming the set upper end position for the shutter/awning.
Procedure to set the lowest limit position for the shutter/awning.
Confirming the set lower end position for the shutter/awning.
Instructions for pairing a second remote control with the motor.
Process for transferring settings from one remote to another.
Final steps for pairing a second remote control with the motor.
Preparing the remote control for deleting its stored settings.
Starting the process to delete settings from the remote control.
Confirming the deletion of settings from the remote control.
To Next Page