14
Setting Sun Automatic
The Sun Sensor measures the light value of the sunlight�
The Sun Sensor works with light values in the borders of
3,000 Lux (overcast day) and 10,000 Lux (sunny day in the shade)�
If the current light value is outside of the set light value borders, the LED
-
sured bordered light value�
Sun Automatic Function
The sun automatic is possible with a manual or automatic drive�
If the light value setting is exceeded for approx� 10 minutes,
the roller shutters lower until it reaches the sun sensor�
After a further approx� 20 minutes the roller shutters are
rolled up until sunlight reaches the sun sensor�
If the light value stays constant, the roller shutters are held in
this position�
If the light value decreases the roller shutter is rolled up to the top
end position�
Changing weather conditions can lead to a delayed response
of the sun sensor�
Other light sources near the sun sensorcan impair its functioning�
199
To Next Page
Loading...
