14 15
GB
The sun automatic is deactivated when the sun sensor is
removed from the window, is covered up, or the plug
is disconnected from the electric belt winder�
Assembling Sun Sensor
The sun sensor is fastened to the inside of the window
with a suction cup�
The position of the sun sensor should be as low as
The sun sensor can be removed by pulling on the strap of the suction
cup� Do not pull on the cable!
The sun sensor can be removed when cleaning the window�
CE DECLARATION AND CONFORMITY
The sun sensor (item no�
DE
22746, 22639) meets the applicable
requirements of European and national regulations� Conformity has been
demonstrated� The full EU Declaration of Conformity document can
be found at: http://www.schellenberg.de (under ‘Download-Center’,
in the ‘Service’ tab)�
To Next Page
Loading...
