EasyManuals Logo

Schellenberg ROLLODRIVE 105 STANDARD User Manual

Schellenberg ROLLODRIVE 105 STANDARD
Go to English
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
ments or lack of experience and knowledge, provided that they are supervised
or have been instructed in safe use of the device and know the risks involved�
Cleaning and maintenance must not be carried out by children unless they are
supervised�
Children must not be allowed to play with the roller shutter drive�
CE DECLARATION AND CONFORMITY
The belt winder (Item no
DE
22710, 22729
) meets the applicable require-
ments of European and national regulations� Conformity has been demonstrated�
The full EU Declaration of Conformity document can be found at:
http://www.schellenberg.de (under ‘Download-Center, in the ‘Service’ tab).
Do not dispose of together with household waste� The product is recyc-
lable and can be deposited at a recycling center or a collection station
for electrical household garbage�
INTENDED USE
This product
(Item no. 22710 / 22729)
is intended exclusively for the operation of
belt-driven roller shutter systems� For this, the roller shutter system must comply
with the technical requirements of the product
Any other or further utilization beyond the explicitly specied shall be regarded
as not intended use�
Alfred Schellenberg GmbH shall not be liable for any consequential damage,
property damage and personal injury due to improper use
According to EN 13659, it must be ensured that the displacement requirements
as per EN 12045 are met for the hanging material� When unrolled, the displace-
ment at the lower edge must be at least 40 mm at an upward-directed force of
150 N� It must be ensured that the travel speed of the hanging must be less than
0�2 m/s in the last 0�4 m�
The roller shutter system and its parts must be in a perfect condition� Defects in
the system or its parts must be repaired before installing the product�
An easily accessible 230 V / 50 Hz mains socket outlet must be available at the
place of installation (see page 229).
The installation surface where the product is to be installed must be level and
suitable�
Machinery Directive
2006/42/EC
EMC Directive
2014/42/EU
RoHS Directive
2011/65/EU

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Schellenberg ROLLODRIVE 105 STANDARD and is the answer not in the manual?

Schellenberg ROLLODRIVE 105 STANDARD Specifications

General IconGeneral
BrandSchellenberg
ModelROLLODRIVE 105 STANDARD
CategoryController
LanguageEnglish