www.scheppach.com
34
|
Switching ON / OFF (g. 4)
10. Operation- / work instructions
Caution! For your safety, the machine must be held only at the two handles (3 and
5, g. 1)!
Always keep the chiselling tools sharp.
Note:
•
•
•
Dust/Chip Extraction
-
•
•
11. Electrical connection
The electrical motor installed is connected and ready for operation. The connec-
tion complies with the applicable VDE and DIN provisions. The customer‘s mains
connection as well as the extension cable used must also comply with these regu-
lations.
Faulty power supply cables