Cylinder Removal and Re-Keying Kit
Part Kit Reorder
Number Description Qty. Qty.
F605-367 CYLINDER DRIVER BAR FOR KPL 10 100
B520-628 WASHER FOR KPD TAILPIECE 15 150
B520-607 SPACER FOR KPD TAILPIECE 15 150
B520-608 RETAINER FOR KPD TAILPIECE 25 250
F605-349 SCREW FOR ATTACHING OUTSIDE KPD 15 150
ESCUTCHEON TO BASEPLATE
B520-606 CYLINDER DRIVER BAR FOR KPD 10 100
Schlage Keypad Deadbolts come standard with a 5-pin solid
brass C-keyway cylinder. The re-keying steps are the same as
for the Schlage B-300 series deadbolt. Cylinder removal and
replacement instructions are illustrated on the back page.
A supplemental kit has been designed with replacement
parts for the Keypad Locks and Deadbolts.
Supplemental Re-Keying Kit
Part Number 38-030 Keypad Re-Keying Kit
To Next Page
Need help?
General