Schlage L9480 User Manual

Provides representations and descriptions of lock functions with page references for trims and chassis.

Details non-keyed locks like Single Dummy Trim and Double Dummy Trim with their respective functions.

Describes the Passage Latch function (F01) where the latchbolt is always retracted by knob/lever.

Details the Bath/Bedroom Privacy Lock (F22) with inside turn piece locking and emergency unlocking.

Explains Privacy with Deadbolt function (L9440), including deadbolt operation and unlocking.

Lists various keyed lock functions like Office and Inner Entry Lock and Apartment Entrance Lock.

Describes the Office and Inner Entry Lock (F04) with key or turn piece operation and auxiliary latch.

Describes the Classroom Holdback Lock (F06) with key outside locking and a holdback feature.

Details the Storeroom Lock (F07) with inoperative outside knob/lever and always-free inside knob/lever.

Explains Fail Safe electrical locking where outside trim is continuously locked.

Explains Fail Secure electrical unlocking where outside trim is continuously unlocked.

Details the Request to Exit feature for electrically locked functions, using a microswitch.

Explains Request to Exit for electrically unlocked functions, using a microswitch.

Details the Institution Lock with fixed knobs/levers and auxiliary latch.

Describes electrically locked (Fail Safe) function for both sides, with continuous locking.

Explains electrically unlocked (Fail Secure) function for both sides, with continuous unlocking.

Details the Entrance Lock with turn piece operation and auxiliary latch.

Explains the Corridor Lock with key outside deadbolt operation and simultaneous retraction.

Details the Classroom Security Lock with key deadbolt operation and always-free inside knob/lever.

Explains deadbolt operation with inside knob/lever retraction.

Details Classroom Lock with key deadbolt operation and limited inside cylinder retraction.

Illustrates assembly of turn hub spring and transfer lever with auxiliary bar guide.

Shows assembly of locking catch, retractor catch, and locking link.

Details assembly of fire door fuse, catch, and hub spring for L functions.

Details assembly of fire door fuse, catch, and hub spring for LV functions.

Provides a chart for cylinder length dimensions and requirements based on trim and door thickness.

Shows exploded view of Everest® Mortise Cylinder parts for concealed applications.

Shows exploded view of Classic Mortise Cylinder parts for concealed applications.

Shows exploded view of Hotel Mortise Cylinder parts for concealed applications.

Shows exploded view of Full Size Classic Interchangeable Core parts.

Shows exploded view of Full Size Hotel Classic Interchangeable Core parts.

Shows exploded view of Small Format Everest® Keyway core parts.

Lists core types, mechanisms, complete cylinders, and cams for L-Series (except L9060/LV9060).

Lists core types, mechanisms, complete cylinders, and cams for L9060/LV9060 Outside.

Lists core types, mechanisms, complete cylinders, and cams for other straight cam applications.

Explains Fail Safe electrical locking where outside trim is continuously locked.

Explains Fail Secure electrical unlocking where outside trim is continuously unlocked.

Details the Request to Exit feature using a microswitch for immediate egress.

Describes L9082 EL/EU function where both knobs/levers are locked or unlocked simultaneously.

Lists cylinder codes and references for Schlage cylinders.

Provides voltage, current, temperature, and RX micro switch ratings.

Details electrical installation requirements and transformer usage.

Explains the two steps to change the lock hand: rotating latchbolt and moving handing screw.

Lists components for lever and rose assembly, including lockcase, spindle, and armor front.

Illustrates step 4 installation for functions 9486/9496, showing driver bar use.

Illustrates step 5 installation for functions 9010, 9176.

Illustrates step 5 installation for numerous functions, showing blocking ring use.

Illustrates step 9 of installation for all functions, showing cylinder and mounting screw tightening.

Explains door handing and moving the handing screw for L and LV locks.

Lists components for knob and escutcheon assembly.

Illustrates step 2 of knob/escutcheon installation, showing cylinder insertion.

Illustrates step 3 of knob/escutcheon installation, showing mounting post tightening.

Illustrates step 5 installation for functions 9010, 9110, 9176.

Illustrates step 5 installation for functions 9040, 9440.

Illustrates step 5 installation for functions 9486, 9496, showing driver bar use.

Illustrates step 6 of installation for all functions, showing inside trim assembly.

Illustrates step 7 installation for functions 9010, 9060, etc., with escutcheon.

Illustrates step 8 installation for functions 9040, 9050, etc., showing thumbturn and deadbolt extension.

Illustrates step 9 installation for functions 9060, 9071, etc., showing blocking ring with double cylinder.

Illustrates step 10 of installation for all functions, showing cylinder and mounting screw tightening.

Explains door handing and moving the handing screw for L and LV locks.

Illustrates step 11 of installation for all functions, showing final assembly.

Lists components for small case mortise locks.

Illustrates step 1 of installation for all functions, showing lockcase mounting.

Illustrates step 2 installation for function L496, showing driver bar use.

Illustrates step 1 installation for functions L460, L462, etc., showing cylinder and blocking ring use.

Illustrates step 3 installation for functions L460, L480, L496, showing thumbturn and deadbolt extension.

Illustrates step 4 of installation for all functions.

Illustrates step 4 installation for function L462.

Illustrates step 4 installation for function L463.

Illustrates step 5 of installation for all functions.

Lists BHMA finish codes and their descriptions, including US equivalents.