To Next PageTo Next Page
Need help?Do you have a question about the Schluter Systems DITRA-HEAT-E-WiFi and is the answer not in the manual?
Guides through testing the Ground Fault Circuit Interrupter (GFCI) functionality.
System operates automatically according to a programmed weekly heating schedule.
Manually override programmed settings for temporary temperature adjustments.
Control temperature automatically according to a programmed schedule.
Set up thermostat connection to your wireless network for remote control and weather.
Choose which sensor (floor or room) controls the heating system.
Select the type of floor sensor used with the thermostat.
Calibrate the floor sensor if the temperature reading differs from actual.
Calibrate the room sensor if the temperature reading differs from actual.
Define minimum and maximum temperatures to protect the floor.
Restore the thermostat to its original factory settings.
Set up thermostat connection to your wireless network.
Configure network, enter email for activation, and verify connection.
Lists common error messages and their solutions for thermostat faults.
General| Model | DITRA-HEAT-E-WiFi |
|---|---|
| Product Type | Programmable Thermostat |
| WiFi Connectivity | Yes |
| Maximum Load | 15A |
| Temperature Range | 41°F to 104°F (5°C to 40°C) |
| Display | LCD |
| Programming | 7-day programmable |
| Compatibility | Ditra-Heat |
| Control Method | Touchscreen |
| Voltage | 120/240V |
| GFCI | Integrated |
| Operating Temperature | 32°F to 104°F |
| Temperature Display | Digital |
| Sensors | Floor sensor |
| Mounting | Wall-mounted |
