18 Copyright © 2020 Axxiom Manufacturing, Inc.
2.1 Notes to Distributors and Owners
2.1.1. Verify that the operation and maintenance manual is included with the AirPrep System
when it is received. Verify that the operation and maintenance manual is included with the
AirPrep System when it is delivered to the purchaser.
2.1.2. This equipment is intended for knowledgeable and experienced users. No person or persons
should be allowed to operate this equipment without first receiving proper training in
abrasive blasting operation and use of this equipment.
2.1.3. Immediately notify Axxiom Manufacturing, Inc. of any instances of use of this equipment
in any manner other than the intended application. See Section 4.0.
2.1.4. Only qualified personnel should load and unload this equipment for shipping. Slings or
other lifting devices must only be attached to the designated lifting points. See the lifting
diagrams shown in Section 2.6.
2.1.5. For further information contact:
Axxiom Manufacturing, Inc.
11927 South Highway 6
Fresno, Texas 77545
Phone: 1-800-231-2085
Fax: 1-281-431-1717
Website: www.SchmidtAbrasiveBlasting.com
2.2 Air Prep System (ACS & ADS) Operating Specifications
Maximum Working Pressure 150 psi @ 250F
Minimum Operating Temperature 35F @ 150 psi
Air Flow Capacity See Section 6.0 table 1
Tank Volume See table below
MODEL NO.
ACS 250P
ACS 400P
ACS 400
ACS 750
ACS 950
ACS 1200
ACS 1600
ACS 2000
ACS 2500
VOLUME (cu ft.)
(Liters)
2.7
(76)
2.7
(76)
8.6
(244)
9.8
(278)
10.0
(283)
10.0
(283)
10.0
(283)
19.5
(552)
19.5
(552)
MODEL NO.
ADS 250P
ADS 400P
ADS 400
ADS 750
ADS 950
ADS 1200
ADS 1600
ADS 2000
ADS 2500
VOLUME (cu ft.)
(Liters)
2.7
(76)
2.7
(76)
8.7
(246)
11.7
(331)
11.7
(331)
11.7
(331)
19.0
(538)
27.3
(773)
30.4
(861)
APPROXIMATE
DELIQUESCENT
CAPACITY (cu ft.)
(Liters)
1.4
(42)
1.4
(42)
5.2
(147)
8.2
(232)
8.2
(232)
8.2
(232)
13.0
(368)
13.0
(368)
17.0
(481)
APPROXIMATE
DELIQUESCENT
CAPACITY
(Qty. 50lb Bags)
2 2 6 9 9 9 16 16 21
2.0 Specifications and General Information
To Next Page
Loading...
