Copyright © 2020 Axxiom Manufacturing, Inc. 9
Section Page
Preface Manual Use, Explanation of Safety Symbols, and Glossary 3
0.0 Warning Decal Identification and Location 4
1.0 Rules for Safer Operation 10
2.0 Specifications and General Information 18
3.0 System Requirements 23
4.0 Abrasive Blast System General Operation 28
5.0 AirPrep System General Operation 29
6.0 Pre-operation Procedures 35
7.0 Operating Instructions 42
8.0 Maintenance and Inspection Instructions 46
9.0 Drawings and Parts Lists 51
9.1 ACS 250P/400P Aftercooler Systems (Air Motor) 52
9.2 ACS 400-2500 Aftercooler Systems (Air Motor) 54
9.3 ACS 250P/400P Aftercooler Systems (Electric Motor) 56
9.4 ACS 400-2500 Aftercooler Systems (Electric Motor) 58
9.5 ADS 250P/400P Air Dryer Systems (Air Motor) 60
9.6 ADS 400-2500 Air Dryer Systems (Air Motor) 62
9.7 ADS 250P/400P Air Dryer Systems (Electric Motor) 64
9.8 ADS 400-2500 Air Dryer Systems (Electric Motor) 66
10.0 Recommended Spare Parts List 68
11.0 AirPrep System Technical Data and Troubleshooting 69
12.0 Warranty and Reference Information 71
13.0 Blasting Data Tables 76
Table of Contents
To Next Page
Loading...
