Schoeps CMIT 5 U - User Manual

CMIT 5 U
Interference Tube “Shotgun” Microphone
User Guide
Table of Contents
page
Features / accessories 15
Applications 17
Filters 18
Starting up 19
Phantom powering 20
Hints on avoiding interference 21
Troubleshooting 22
Care and maintenance 24
Technical specifications 25
Block diagram 26
Warranty 27
14

Summary

Features and Accessories

Unique Features of the CMIT 5 U

Details the distinct design aspects and performance benefits of the CMIT 5 U microphone.

Filters

Filter Overview and Functionality

Describes the three switchable filters for low-frequency suppression and high-frequency boost.

Low-Frequency Filter Details

Explains the 80 Hz and 300 Hz low-cut filters and their purposes.

High-Frequency Emphasis

Start Up and Phantom Powering

Phantom Powering Requirements

Phantom Powering Standards and Specifications

Details DIN EN 61938 for P48 powering and impedance matching.

Hints on Avoiding Interference

Electromagnetic Compatibility (EMC)

Explains the microphone's immunity and general advice for reducing noise.

Practical Interference Reduction Tips

Troubleshooting

Managing Wind Noise and Vibration

Understanding and Preventing Overload

Overload Solutions and Phantom Powering

Technical Specifications

Key Specifications Overview

Lists the main technical parameters like frequency range, sensitivity, and SPL.

Polar Diagram and Frequency Response

Includes graphical representations of the microphone's directional pattern and frequency response.

Block Diagram

Internal Circuitry Overview

Presents a schematic of the microphone's internal components and signal flow.

Phantom Power Verification

Warranty and Declaration of Conformity

Product Warranty Information

Schoeps CMIT 5 U Specifications

General

Brand	Schoeps
Model	CMIT 5 U
Category	Microphone
Language	English