GB
13
Starting the appliance
! Before starting the appliance, follow the
installation instructions (see Installation).
! Before connecting the appliance, clean the
compartments and accessories well with lukewarm
water and bicarbonate.
1. Insert the plug into the socket and ensure that the
internal light illuminates.
2. Turn the TEMPERATURE ADJUSTMENT knob to an
average value. After a few hours you will be able to
put food in the refrigerator.
Setting the temperature
The temperature inside the refrigerator compartment
automatically adjusts itself according to the position of
the thermostat knob.
1 = warmest MAX = coldest
We recommend, however, a medium position.
The cooling section of the refrigerator is located
inside the back wall of the compartment, providing
increased space and improved aesthetics. The back
wall will be covered in frost or water droplets depending
on whether the compressor is operating or paused. This
is not a cause for concern; the refrigerator is
functioning normally.
If the TEMPERATURE ADJUSTMENT knob has been set
to a high value, with large quantities of food inside and
a high ambient temperature outside the refrigerator, the
appliance could operate continuously, resulting in high
frost formation and high energy consumption: this may
be counteracted by turning the knob towards lower
temperature values (defrosting will occur automatically).
Using the refrigerator to its full potential
Use the TEMPERATURE ADJUSTMENT knob to
adjust the temperature (see Description).
Place only cold or lukewarm foods in the
compartment, not hot foods (see Precautions and
tips).
Remember that cooked foods do not last longer than
raw foods.
Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.
Start-up and use
Food hygiene
1. Once you have bought your food, remove all
external packaging made of paper/cardboard or
other wrappers, which could introduce bacteria or
dirt inside your refrigerator.
2. Protect the food, (especially easily perishable items
and those that have a strong smell), in order to avoid
contact between them, thereby removing both the
possibility of germ/bacteria contamination as well as
the diffusion of strong odours inside the fridge.
3. Store all food in such a way as to ensure air can
circulate freely between different items.
4. Keep the inside of your fridge clean, taking care not
to use oxidiser or abrasive products.
5. Remove all food past its expiry date from the
refrigerator.
6. For the correct preservation of food, all easily
perishable items (soft cheeses, raw fish, meat, etc.)
should be stored in the coldest zone of the fridge
compartment, i.e. just above the salad crisper where
the temperature indicator is situated.
To Next Page
Loading...
