SCHOLTES SCM2 - Built-In Installation

9
GB
BUILT-IN INSTALLATION
Verify the minimum measurements required for correct installation
of the appliance.
The coffee maker must be installed in a column and the column
must be firmly fixed to the wall with commercially available brackets.
Important:
• Important: all installation or maintenance operations must be per-
formed with the appliance disconnected from the mains electri-
city supply.
• Kitchen furniture in direct contact with the appliance must be heat
resistant (65°C min).
• To guarantee correct ventilation, leave a gap at the bottom of the
cabinet (see measurements in figure).
361 mm
528 mm
372 mm
15 mm
455 mm
595 mm
21 mm
398 mm
45 mm
45 mm
45 mm
45 mm
450 + 2 mm
850 mm Min
500 mm
545 mm Min.
200 cm
2
560 + 8
mm