SCHOTT Termofrost
®
SCHOTT Termofrost
®
Page 8
5. Installation | Doors of a line
Hang in the doors - The bottom of the frame does not need to be fixed at this
stage
Start with insert upper door hinge into the hinge plate bearing in top
Door (in open position) has to be in
90° towards frame
Unscrew the screw that is kept
in the frame, then turn the
gravity plate and put the door in
the foreseen hole
Put the screw and washer back
to secure the gravity system.
Use max. force of 6N.
Important : To assure the
installation put the foreseen
screw
To Next Page
Loading...